Re: PXE installation HP Image
I can install Esxi using ilo interface.But i want to automate that process and I don't want to use autodeploy.
View ArticleRe: Adding a drive to ESXi
Issues like this might be caused by already existing partitions on the disk. What usually helps is to clean up the partition table on the disk using either a 3rd party tool like gparted or by following...
View ArticleRe: PXE installation HP Image
Hi did you get around this issue.. I'm having the same problem on a dl360p Gen8.
View ArticleRe: PXE installation HP Image
Hi,I removed vib "net-mst" from Image.You can read about this module here http://www.mellanox.com/page/management_tools
View ArticleRe: Adding a drive to ESXi
Just click on Storage adapter and scan after installation of HDD, it will detect new HDD and now click on Storage option in Vcenter in ESX host configuration option---Storage--Add Storage----Select the...
View ArticleRe: No License Icon
and then go to the Edit hotlink in the upper right corner. then you will be able to enter a licence in the dialog that results.
View ArticleClik here to view.
Re: PXE installation HP Image
Hi, How did you solve the issue? I'm in same boat I can't even reach to modules. All I'm getting is "Boot failed: press a key to retry, or wait for reset"Please can you share your tftp file ?
View ArticleESXi 5.5 installation issue on HP Zbook 15- Integrated Intel I217LM Gigbyte...
hi Team, Greetings!! I am trying to setup a small test lab of ESXi 5.5 on HP Zbook 15 Mobile Workstation. the Config of the machine is Intel core i7 vPRO, 32 GB RAM, 500 GB smart Sata HDD. During the...
View ArticleRe: ESXi 5.5 installation issue on HP Zbook 15- Integrated Intel I217LM...
Hi Welcome to communities. http://kb.vmware.com/selfservice/search.do?cmd=displayKC&docType=kc&docTypeID=DT_KB_1_1&externalId=1003686 Please follow steps if not
View ArticleRe: ESXi 5.5 installation issue on HP Zbook 15- Integrated Intel I217LM...
Seems like this guy have success using the net-e1000e-2.3.2.x86_64.vib file: VMware ESXi 5.x onto a Dell OptiPlex 9020 (Intel I217-LM) | ComputerComputerComputer
View ArticleRe: ESX 5.1 config changes do not save
I cannot answer your question, however I do wish to thank you. Your post helped me fix my problem at home where my white box does exactly the same thing. Moved the usb key to a usb 2.0 port and all the...
View ArticlePSOD while updating ESXi 5.1 to 5.5 on Dell PowerEdge r520
Hello Everyone, we have tried to install ESXi 5.5 on our Dell PowerEdge R520 yesterday.Before we had the possibility to do anything, a PSOD appeared, saying:No place on disk to dump data.No file...
View ArticleRe: PSOD while updating ESXi 5.1 to 5.5 on Dell PowerEdge r520
Hi, try install Dell customized ESXi image:http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=YGH6K&fileId=3397524992&osCode=XI55&productCod…
View ArticleClik here to view.
Re: PSOD while updating ESXi 5.1 to 5.5 on Dell PowerEdge r520
Hello, with the Dell Custom Image it worked.Problem is Solved.Thank you for your help! Regards
View ArticleClik here to view.
ESXI 5.5 Problem with SSD 512 GB
Hi today i download ESXI 5.5 and now i try install, but i have problem ESXI 5.5 not see on install my SSD, model: "ts512gssd370"On install ESXI 5.5 see just my USB Drive but not SSD hard Can u help me...
View ArticleRe: ESXI 5.5 Problem with SSD 512 GB
Before that, I installed ProxMox 3.3 and no problems all establish normal
View ArticleRe: ESXI 5.5 Problem with SSD 512 GB
Hi, If you go to your ESX host and click configuration -> Storage Adapters -> Do you see your SATA/SAS controller? If there is nothing there (vmhba0 usually) then you are missing the driver for...
View ArticleKickstart create a VMFS Volume
Hi I'm building a kickstart config for our branch offices. I wish to install to a SD card and then format and create a VMFS volume on the RAID 6 set of disks. It installs fine to the SD card. How ever...
View ArticleNeed suggestions
Hello Expert,We have some physical servers running with ESXi 5.5 U2. Some configuration changes have been done on those servers by others. We do not want those changes. I was just wondering , do you...
View ArticleRe: Need suggestions
To revert back to a previous configuration, you need to backup the configuration that was working fine once. The option is there but you need that previous state's backup. Just like snapshots. They do...
View Article